Specifications - Toro Z Master 6000 Professional Series Operator's Manual

Choke Control
Use the choke to start a cold engine. Pull the choke
knob up to engage it. Push the choke knob down to
disengage it (Figure 5).
Blade-Control Switch (Power
Takeoff)
The blade-control switch (PTO) engages and
disengages power to the mower blades
Ignition Switch
Use this switch to start the mower engine. It has 3
positions: S , R , and O
TART UN
Motion-Control Levers
Use the motion-control levers to drive the machine
forward, reverse, and turn either direction.
Neutral-Lock Position
Use the N -
EUTRAL LOCK
safety-interlock system to engage and to determine
the N position.
EUTRAL
Fuel-Shutoff Valve
Close the fuel-shutoff valve (under the seat) when
transporting or storing the mower.
Attachments/Accessories
A selection of Toro approved attachments and
accessories is available for use with the machine to
enhance and expand its capabilities. Contact your
Authorized Service Dealer or Distributor or go to
www.Toro.com for a list of all approved attachments
and accessories.
(Figure
.
FF
position with the

Specifications

Note:
Specifications and design are subject to
change without notice.
Width:
Cutting Width
5).
Without Deck
Deflector—Up
Deflector—Down
Length:
Roll Bar—Up
Roll Bar—Down
Height:
Roll Bar—Up
179.1 cm (70.5 inches)
Weight:
Model
74919TE
74925TE
14
132 cm (52 inch) 152 cm (60 inch)
Deck Deck
132 cm 152 cm
(52 inches) (60 inches)
116 cm 134.6 cm
(46 inches) (53.0 inches)
146 cm 156.8 cm
(58 inches) (61.7 inches)
172 cm 192.2 cm
(68 inches) (75.7 inches)
132 cm (52 inch) 152 cm (60 inch)
Deck Deck
201 cm 211.1 cm
(79 inches) (83.1 inches)
206 cm 215.4 cm
(81 inches) (84.8 inches)
Roll Bar—Down
118.9 cm (46.8 inches)
Weight
537 kg (1183 lb)
590 kg (1301 lb)