Table of Contents
Advertisement
4.
5.
6.
RUGGEDCOM RX1501
Installation Manual, 10/2021, C79000-G8976-1054-21
Insert the module into the empty slot.
1
2
3
Chassis
1
Power Module
2
Screws
3
Figure 4.6
Installing a Power Module
Hand-tighten the screws to secure the power module to the chassis.
Turn on power to the device and confirm the module is receiving and supplying
power. This is indicated by the LEDs on the module.
LED
O
I
4.4 Installing/Removing Power Modules
State
Green
The module is supplying power
Green
The module is receiving power
Modules
Description
33
Advertisement
Table of Contents
