Table of Contents
Advertisement
Supervisor level
Special programmes
You can put together five special re-
sidual moisture or time-controlled pro-
grammes and assign your own pro-
gramme names.
First, enter the programme name.
Select the special programme you
want to change.
The
menu opens.
Save as
Use the letters and symbols below
the line to enter the name.
Touch the
Save
You can now enter the parameters for a
Res. moisture programme or
Timed drying.
The five special programmes are pre-
programmed at the factory. You can
change these special programmes.
The special programmes are added to
the programme packages. Enter the
name and settings of your special pro-
gramme into the "Special pro-
grammes" table in the "Programme
overview" chapter.
Res. moisture programme
– Final residual moisture:
- 6 % (dry) – 40 % (damp)
– Extra drying time:
0–60 minutes
– Temperature (Process air):
cold – 60 °C
– Holding phase
– Holding time:
0–60 minutes
82
sensor.
– Holding temperature (Process air):
cold – 60 °C
– Cooling down temp. (Process air):
40–55 °C
– Anti-crease
– Drum rotation main direction:
0–500 seconds
– Pause:
100–3000 seconds
– Drum reversal:
0–500 seconds
Timed drying
– Running time:
1–120 minutes
– Temperature (Process air):
cold – 60 °C
– Cooling down temp. (Process air):
40–55 °C
– Anti-crease
– Drum rotation main direction:
0–500 seconds
– Drum reversal:
0–500 seconds
– Pause:
100–3000 seconds
Advertisement
Table of Contents
