System Setup Options - Alienware AURORA R11 Service Manual

System setup options

NOTE: Depending on your computer and its installed devices, the items listed in this section may or may not appear.
Table 4. System setup options—Main menu
Main
System Time
System Date
BIOS Information
BIOS Version
Product Information
Product Name
Service Tag
Asset Tag
CPU Information
CPU Type
CPU Speed
CPU ID
Cache L1
Cache L2
Cache L3
Memory Information
System Memory
Memory Speed
Table 5. System setup options—Advanced menu
Advanced
Advanced BIOS Features
PowerNow!
Virtualization
Integrated NIC
SATA Operation
Power Options
Numlock Key
Wake Up by Integrated LAN
AC Recovery
Deep Sleep Control
USB Wake Support (S3)
USB PowerShare (S4/S5)
100
Displays the current time in hh:mm:ss format.
Displays the current date in mm/dd/yyyy format.
Displays the BIOS version number.
Displays the product name. Default: Alienware Aurora R11
Displays the service tag of your computer.
Displays the asset tag of your computer.
Displays the processor type
Displays the speed of the processor.
Displays the processor identification code.
Displays the processor L1 cache size.
Displays the processor L2 cache size.
Displays the processor L3 cache size.
Displays the total computer memory installed.
Displays the memory speed.
Allows you to enable or disable AMD PowerNow! the USB
devices to wake the system.
Allows you to enable or disable AMD Virtualization technology
feature for the processor.
Allows you to enable or disable Integrated NIC control.
Allows you to configure the operating mode of the integrated
SATA hard drive controller.
Allows you to set the status of the Num Lock key during boot to
On or Off.
Allow the computer to be powered on by special LAN signals.
Sets what action the computer takes when power is restored.
Allows you to define the controls when Deep Sleep is enabled.
Allows you to enable the USB devices to wake the system from
Standby.
Allows you to charge external devices.