Disassembly And Reassembly; Base Cover - Dell Inspiron 7591 2-in-1 Service Manual

Component
Touchpad bracket
Touchpad
Wireless-card bracket

Disassembly and reassembly

Base cover

Removing the base cover
NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in Before working inside your
working inside your computer. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Procedure
1. Loosen the two captive screws that secure the base cover to the palm-rest assembly.
2. Remove the seven screws (M2x4) that secure the base cover to the palm-rest assembly.
3. Using a plastic scribe, pry the base cover from the tabs on the hinges and continue to pry the base cover from the slots on the palm-
rest assembly.
CAUTION: Do not pry the base cover from the middle as it might damage the chassis.
4. Carefully remove the base cover off the palm-rest assembly.
Secured to
Palm-rest assembly
Palm-rest assembly
System board
computer. After working inside your computer, follow the instructions in
Screw type Quantity
M1.6x2 3
M1.6x2 2
M2x3 1
Screw image
Removing and installing components
After
9