JVC EX-D5 Service Manual page 11

3.1.6 Removing the switching power supply
(See Figs.13 and 14)
• Remove the side panels L/R, top panel assembly and rear
panel.
(1) From the top side of the main body, disconnect the wire
from the connector CN200
Fig.13.)
(2) Take out the switching power supply in the direction of the
arrow. (See Fig.14.)
on the regulator board. (See
Wire holder
Fig.13
Switching power supply
Fig.14
Regulator board
CN200
(No.MB433)1-11