Toshiba e-STUDIO163 Service Manual page 197
Multifunctional digital systems
Hide thumbs
Also See for e-STUDIO163:
- Service handbook (235 pages) ,
- Service manual (222 pages) ,
- Operator's manual (162 pages)
Table of Contents
Advertisement
(10) Remove 3 screws. Take off 1 bearing and the
bracket.
(11) Take off 4 gears and 1 timing belt.
(12) Remove 1 E-ring, 1 pin and 1 pulley.
(13) Take off the guide roller on the rear side.
© 2005 - 2008 TOSHIBA TEC CORPORATION All rights reserved
Bearing
Bracket
Fig. 12-22
Timing belt
Gear
Gear
Fig. 12-23
Guide roller
Pulley
Pin
E-ring
Fig. 12-24
12 - 17
e-STUDIO163/203
DEVELOPMENT SYSTEM
12
Advertisement
Table of Contents
