Disassembly And Replacement - Toshiba e-STUDIO163 Service Manual
Multifunctional digital systems
Hide thumbs
Also See for e-STUDIO163:
- Service handbook (235 pages) ,
- Service manual (222 pages) ,
- Operator's manual (162 pages)
Table of Contents
Advertisement
11.7 Disassembly and Replacement
[A] Process unit
(1)
Open the ADU cover and transfer unit.
(2)
Open the front cover and take off the toner
cartridge.
(3)
Disconnect 1 connector. Loosen 2 screws
and pull out the process unit.
Note:
When installing the process unit, make sure
that the connector (harness) is not caught
under the developer unit.
© 2005 - 2008 TOSHIBA TEC CORPORATION All rights reserved
Process unit
Fig. 11-6
11 - 9
e-STUDIO163/203
DRUM RELATED SECTION
11
Advertisement
Table of Contents
