1 Press the Mode Rocker to locate the
announcement-group mode.
2 Press the PTT button to initiate the
announcement.
Ignition Switch Options
This feature allows the user to select the functionality
of the radio based on the Ignition State of the radio
user's vehicle. The following options are available.
Blank
This option allows the user to power on and power off
the radio through the Power button regardless of the
current state of the Ignition.
Tx Inhibit
This option allows the user to power on and power off
the radio through the Power button regardless of the
current state of the Ignition. In addition, if the Ignition
is not present, then all transmissions are inhibited.
This includes receiving any Trunking dispatch
communications since the radio will not affiliate with
the Trunking systems.
112
English
PTT Tx Inhibit
This option allows the user to power on and power off
the radio through the Power button regardless of the
current state of the Ignition. In addition, if the Ignition
is not present, then all PTT button transmissions are
inhibited. However, the radio is able to affiliate with
the Trunking systems.
Required
This option allows the user to power on the radio only
if the Ignition is present. The radio can be powered off
either through Power button press or when Ignition is
lost. In addition, the radio automatically powers on
when the Ignition is present only if the radio was
turned off due to the ignition being removed.
This option allows the radio to power off when
Inactivity Auto Power Off Timer expires, or, when
Ignition Auto Power Off Timer expires.
Soft Power Off
This option allows the user to power on the radio
either through Power button presses or when the
Ignition is detected. Meanwhile, if the Power button
was pressed or the Ignition was removed, the radio
will be turned off.