Replacing The Throttle Control (2010 4-Stroke Models) - Wacker Neuson BS 50 Repair Manual

Engine and Upper Machine Components
4.3

Replacing the Throttle Control (2010 4-stroke models)

Requirements
Removal
4.3.1
4.3.2
4.3.3
4.3.4
4.3.5
• Machine shut down and cool
• Torque wrench
Perform the procedure below to remove the throttle control.
Remove the silencing cover. See topic
Disconnect the throttle cable at the swivel
Remove the clamp
(c)
Clip the wire ties .
(d)
Remove the bolt and hardware
(h)
Removing the Silencing Cover
(a)
.
.
(b)
30
Repair
and the clamp .
(b)
wc_tx001546gb.fm
.