Auto Tuning For Bb5.0 - Nokia 6500 SLIDE RM-240 Service Manual

RM-240
RF troubleshooting

Auto tuning for BB5.0

This phone can be tuned automatically.
Autotune is designed to align the phone's RF part easier and faster. It performs calibrations, tunings and
measurements of RX and TX. The results are displayed and logged in a result file, if initiated.
Hardware set up
Hardware requirements for auto tuning:
• PC (Windows 2000/XP) with GPIB card
• Power supply
• Product specific module jig
• Cables: XRF-1 (RF cable), USB cable, GBIP cable and DAU-9S
or one device including all.
• Signal analyser (TX), signal generator (RX) and RF-splitter
Page 4 –8 COMPANY CONFIDENTIAL Issue 1
Copyright © 2007 Nokia. All rights reserved.