Replacing A Headlight Bulb - Yamaha 2005 YZF-R1T Owner's Manual

8. Place the cowling in its original po-
sition, and then install and tighten
the quick fastener screws.
1. Slot
2. Projection
NOTE:
Make sure that the projections are in-
serted into the slots.
9. Install the quick fasteners.
NOTE:
To install a quick fastener, push its pin
back so that it protrudes from the fas-
tener head, then insert the fastener and
push the protruding pin in until it is flush
with the fastener head.
PERIODIC MAINTENANCE AND MINOR REPAIR

Replacing a headlight bulb

1. High beam headlight bulb
2. Low beam headlight bulb
This model is equipped with quartz bulb
headlights. If a headlight bulb burns
out, replace it as follows.
To replace a high beam headlight
bulb
1. Disconnect the headlight coupler,
and then remove the bulb cover.
6-32
EAU33900
1. Headlight bulb cover
2. Headlight coupler
2. Unhook the headlight bulb holder,
and then remove the defective
bulb.
1. Headlight bulb holder
6