Multi-Function Meter Unit - Yamaha 2005 YZF-R1T Owner's Manual

INSTRUMENT AND CONTROL FUNCTIONS

Multi-function meter unit

3
1. Clock
2. Speedometer
3. "SELECT" button
4. "RESET" button
5. Tachometer
6. Coolant temperature display/air intake tem-
perature display
7. Odometer/tripmeters/fuel reserve tripme-
ter/stopwatch
8. Shift timing indicator light
WARNING
Be sure to stop the vehicle before
making any setting changes to the
multi-function meter unit.
The multi-function
equipped with the following:
G
EAU34541 a speedometer (which shows the
riding speed)
G a tachometer (which shows engine
speed)
G an odometer (which shows the to-
tal distance traveled)
G
two tripmeters (which show the
distance traveled since they were
last set to zero)
G a fuel reserve tripmeter (which
shows the distance traveled since
the fuel level warning light came
on)
G
a stopwatch
G
a clock
G a coolant temperature display
G an air intake temperature display
G
a self-diagnosis device
G
a display brightness and shift tim-
ing indicator light control mode
EWA12421
NOTE:
Be sure to turn the key to "ON" before
using the "SELECT" and "RESET" but-
tons.
meter unit is
Tachometer
1. Tachometer
2. Tachometer red zone
The electric tachometer allows the rider
to monitor the engine speed and keep it
within the ideal power range.
When the key is turned to "ON", the ta-
chometer needle will sweep once
across the r/min range and then return
to zero r/min in order to test the electri-
cal circuit.
CAUTION:
Do not operate the engine in the ta-
chometer red zone.
Red zone: 13750 r/min and above
3-8
ECA10031