Advertisement
TG1311_1313SA(e).book Page 15 Monday, September 29, 2008 11:18 AM
Code No.
Feature (default setting)
*5
Call restriction
{6}
■ Setting call restriction
− Enter base unit PIN (default: "0000").
the desired handset number by pressing the
appropriate dial key.
L The selected handset number flashes on the
display.
− {>}
− Enter the phone number to be restricted (8 digits
max.).
L To select a different memory location, press {>}
and enter a number.
− {>}
■ Turning on/off call restriction
− Enter base unit PIN (default: "0000").
L Handset number is displayed. A flashing number
indicates call restriction is on; a non-flashing
number indicates call restriction is off.
− Enter the desired handset number by pressing the
appropriate dial key to turn on/off. i {>} 2 times
Code No.
Feature (default setting)
Emergency number ("10177", "10111", "082911",
{6}
"084124")
*2
− Enter base unit PIN (default: "0000").
i Enter
Date and time: page 9
{*}
*1 Only the emergency number setting is not reset.
*2 If you forget your PIN, contact your nearest Panasonic service centre.
*2
*3 The recall/flash time depends on your telephone exchange or host PBX.
Contact your PBX supplier if necessary.
*4 If you change the PIN, please write down your new PIN as the unit will
not reveal it to you again.
*5 Call restriction feature restricts the handset from dialling certain phone
numbers. You can assign up to 10 phone numbers (memory locations
0–9) to be restricted.
*6 Emergency number feature determines which phone numbers may be
dialled while the call bar feature is turned on. A total of 4 emergency
numbers (memory locations 1–4) can be stored.
Useful Telephone Settings
*6
*2
■ Storing:
− Enter the emergency number (8 digits max.).
L To select a different memory location, press
{>} and enter a number.
− {>}
■ Editing:
Press {>} to display the desired number. i {C}
i Enter the new emergency number. i {>}
i {*}
15
Advertisement
