Monitor Angle Control; View Camera Control - Kenwood DNX8160DABS Instruction Manual

Monitor Angle Control

You can adjust the position of the monitor.
1
Press the <G> button.
Angle Adjust screen appears.
2
Select a below number that represents
your desired angle setting.
Default is "0".
Off Position
You can store the current monitor angle as the
angle during power off. Touch [Memory] when
the desired angle is selected.
It is effective when "Auto Open" is set to OFF.
Auto Open (DNX8160DABS)
The front panel can be set to open
automatically when the ignition is turned
off, so that it can be detached for antitheft
purpose.

View Camera Control

You can select the front or rear view camera.
1
Press the
volume knob.
Popup menu appears.
2
Touch [Camera].
View camera screen appears.
3
Adjust each item as follows.
1
1 Switching the View Camera
Touching each time changes between the
front view camera and rear view camera.
2 Camera off
Touch to exit the camera screen.
Setting Up
<MENU> button/
2
77