Positioning The Flow Baffle - Toro 74922 Operator's Manual

1
3
Figure 31
1. Unlock lever
2. Rotate the cam lock to
increase or decrease
locking pressure
2
4
G008961
3. Position the baffle
4. Lock lever

Positioning the Flow Baffle

The following figures are only recommendations for use.
Adjustments will vary by grass type, moisture content, and
height of grass.
Note: If the engine power draws down and the mower
ground speed is the same, open up the baffle.
Position A
This is the full rear position. The suggested use for this
position is a follows.
•
Use for short, light grass mowing conditions.
•
Use in dry conditions.
•
For smaller grass clippings.
•
Propels grass clippings farther away from the mower.
Position B
Use this position when bagging. Always align it with the
blower opening.
25
Figure 32