Table of Contents
Advertisement
Super HD Security Camera
4 Megapixel Bullet Cameras for HD NVRs
What's in the box?
All installation accessories included
• NHD-818™ Bullet Camera
• Ethernet Cable 60ft / 18m
• Mounting Screws & Plugs
• Operating Instructions
• Theft Deterrent Stickers
Specifications
NHD-818™ CAMERA
Video
Video Quality
Up to 4MP
Backlight Compensation
Yes
Wide Dynamic Range
Yes
Viewing Angle
75°
Audio
Microphone
Yes
Audio Range
Up to 16ft/5m
Night Vision
Night Vision Distance
Up to 100ft / 30m
IR cut Filter
Yes
General
Indoor / Outdoor
Indoor / Outdoor, IP66 rated
Operating Power
DC 12V - PoE
Operating Temperature
-4°F ~ 122°F / -20°C ~ 50°C
Body Construction
Aluminum
Dimensions - Camera
2.6" x 7.4" x 2.6" /
66mm x 188mm x 66mm
Weight - Camera
0.961lbs / 436g
Code
Swann Code
SWNHD-818CAM
Take a closer look
Weather resistant
aluminum casing
75° Viewing angle
Color video
image sensor
Easy mount base screws
into a flat surface
See the difference
VIEW
CLOSE
UP
RESOLUTION
Perfect for close up detail
Know what's happening
such as license plates,
with zoom 75% more
facial detail, clothing
powerful than 1080p
1920 pixels
1080P HD
2560 pixels
4MP Super HD
Our Promise
Swann stands by its promise of Lifetime Support
to make advanced security easy to use, install and
maintain. Everything is in the pack but if you need
it Swann's help desk is available 24 hours a day,
7 days a week for the life of the product.
Installation is easy
Do-it-Yourself
Installing this Swann product is simple. For
instructions, tips and videos see the operating
instructions in this pack or visit www.swann.com
Professional Installation
Need extra help? We have an installer in your
region! For more visit www.swann.com
For more information on this product visit
www.swann.com
75%
BETTER
colors & more
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the SWNHD-818CAM and is the answer not in the manual?
Questions and answers
NHD-818CAM , the camera powers up with night lights all red but camera does not send any video in any channels. Is there parts to repair it.? may be only the circuit board is bad
If the Swann SWNHD-818CAM camera powers up with red night lights but does not send any video, try the following steps to troubleshoot and potentially fix the issue:
1. Check Cable Connections – Ensure all cables are securely connected. A loose connection may cause video loss.
2. Change NVR Channel – Connect the camera to a different channel on the NVR and reboot the system to refresh the IP address.
3. Replace Network Cable – The cable may be damaged, so try using a different network cable.
4. Reboot the System – Restart both the camera and the NVR to reset the connection.
If these steps do not resolve the issue, further technical support may be required.
This answer is automatically generated