Do you have a question about the SWNHD-818CAM and is the answer not in the manual?
Questions and answers
Mo Aidi
February 24, 2025
NHD-818CAM , the camera powers up with night lights all red but camera does not send any video in any channels. Is there parts to repair it.? may be only the circuit board is bad
1 comments:
Mr. Anderson
February 24, 2025
If the Swann SWNHD-818CAM camera powers up with red night lights but does not send any video, try the following steps to troubleshoot and potentially fix the issue:
1. Check Cable Connections – Ensure all cables are securely connected. A loose connection may cause video loss. 2. Change NVR Channel – Connect the camera to a different channel on the NVR and reboot the system to refresh the IP address. 3. Replace Network Cable – The cable may be damaged, so try using a different network cable. 4. Reboot the System – Restart both the camera and the NVR to reset the connection.
If these steps do not resolve the issue, further technical support may be required.
Page 1
• Includes Cat 5E Ethernet cable & everything needed for HD security made easy POWER OVER ETHERNET • This camera can only be used in combination with Swann’s Super HD Network Video Recorders including NVR4-7400™, NVR8-7400™ & NVR16-7400™ for cutting-edge IP surveillance •...
Page 2
Color video maintain. Everything is in the pack but if you need image sensor it Swann’s help desk is available 24 hours a day, 7 days a week for the life of the product. Installation is easy Do-it-Yourself Installing this Swann product is simple.
Page 3
Super HD Security Camera 4 Megapixel Bullet Camera INSTRUCTION MANUAL...
Swann. The end user is responsible for all freight charges incurred to send the product to Swann’s repair centres. The end user is responsible for all shipping costs incurred when shipping from and to any country other than the country of origin.
As we’re constantly making improvements to our products, firmware, software and user manuals, we reserve the right to change the information without prior notice. For the latest updates and information, please visit: http://support.swann.com...
Welcome Congratulations on your purchase of this Swann Super HD Security Camera with Power Over Ethernet. You’ve made a fine choice for keeping a watchful eye over your home or business. The camera delivers brilliant and amazingly clear high definition images and videos in both day and nighttime conditions even in complete darkness.
Page 7
Viewing the camera on your Swann NVR • After you have connected the camera to your Swann NVR, the camera will be automatically detected and assigned an IP address when you turn on your NVR. If the camera is not detected, check that the Ethernet cable is securely plugged in.
Installing the camera Choosing a location to install the camera The camera is very flexible, and can be installed practically anywhere. Some of the things you’ll have to consider when choosing a location are: • What you want to monitor, and where you’ll get the best view of it. •...
Release the Reset button after a few seconds. Having problems? We’re here to help! Visit us at http://support.swann.com. You’ll find all the answers to the most frequently asked questions. If you would like to reach us by email or phone,...
Need help?
Do you have a question about the SWNHD-818CAM and is the answer not in the manual?
Questions and answers
NHD-818CAM , the camera powers up with night lights all red but camera does not send any video in any channels. Is there parts to repair it.? may be only the circuit board is bad
If the Swann SWNHD-818CAM camera powers up with red night lights but does not send any video, try the following steps to troubleshoot and potentially fix the issue:
1. Check Cable Connections – Ensure all cables are securely connected. A loose connection may cause video loss.
2. Change NVR Channel – Connect the camera to a different channel on the NVR and reboot the system to refresh the IP address.
3. Replace Network Cable – The cable may be damaged, so try using a different network cable.
4. Reboot the System – Restart both the camera and the NVR to reset the connection.
If these steps do not resolve the issue, further technical support may be required.
This answer is automatically generated