Hard Drive - HP 15-ay000 Maintenance And Service Manual

Hard drive

NOTE: The hard drive spare part kit does not include the hard drive bracket, cable, or connector board.
Description
Hard drive for use in HP Notebook PC models:
2-TB, 5400-rpm, hybrid 8 GB SSD, 9.5 mm
Hard drive for use in HP Notebook PC and HP 250/256 G5 Notebook PC models:
1-TB, 5400-rpm, hybrid 8 GB SSD
1-TB, 5400-rpm, 2.5-in
1-TB, 5400-rpm, 2.5-inch (for use in India)
500-GB, 5400-rpm, 7-mm
Hard drive for use in HP 250/256 G5 Notebook PC models:
500-GB, 7200-rpm, 7-mm
Hard drive connector board
Hard drive cable for use in HP Notebook PC models
Hard Drive Hardware Kit (ETB) for use in HP 250/256 G5 models
Hard Drive Hardware Kit (non-ETB) for use in HP 250/256 G5 models
Before removing the hard drive, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the optical drive (see
6. Remove the bottom cover (see
To remove the hard drive:
1. Disconnect the hard drive cable from the system board (1).
2. Remove the three Phillips PM2.0×3.0 screws (2) that secure the hard drive assembly to the computer.
60 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
Battery on page 48).
Optical drive on page
Bottom cover on page
49), if installed.
52).
Spare part number
801808-005
731999-005
778192-005
676423-855
778186-005
703267-005
817878-001
855003-001
859515-001
859516-001