Sony SRS-X99 Help Manual page 210

3. Turn on the speaker.
Complete step 9 within 15 minutes after turning on the speaker.
The (on/standby) indicator lights up in green, then the LINK indicator begins to flash.
When you configure the settings of the speaker for the first time after purchase, or after you initialize the speaker,
wait until the LINK indicator begins to flash slowly (once per 3 seconds). Slow flashing begins in about two minutes.
4. Tap the (BLUETOOTH)
The (BLUETOOTH) indicator begins to flash in white.
When you turn on the speaker for the first time after purchase, pairing information is not stored in the speaker. In
this case, tap the
in white and the speaker enters pairing mode automatically, then go to step 6.
5. Tap and hold the
The (BLUETOOTH) indicator begins to flash quickly in white, and the speaker enters pairing mode.
6. Search for the speaker by the iPhone.
i. Tap [Settings].
ii. Tap [Bluetooth].
iii. Tap[ ]to turn on BLUETOOTH.
PAIRING button on the speaker once.
(BLUETOOTH) PAIRING button, the
(BLUETOOTH) PAIRING button on the speaker until beeps are heard.
(BLUETOOTH) indicator will begin to flash quickly
201