Sony SRS-X99 Help Manual page 199

Help Guide
How to Use
Personal Audio System
SRS-X99
Turning the power on
1. Tap the (on/standby) button.
The (on/standby) indicator lights up in green.
Hint
The LINK indicator also begins to flash when the speaker is turned on. When you turn on the speaker for the first time
after purchase, or after you initialize the speaker, you can configure the network settings after the LINK indicator
begins to flash slowly (once per 3 seconds). Slow flashing begins in about two minutes.
When you turn on the speaker in the BLUETOOTH/Network standby mode, the start-up time becomes shorter and the
speaker will become operational sooner, than when you turn on the speaker in standby mode. To turn on the
BLUETOOTH/Network standby function, with the speaker turned on, tap and hold the
the (on/standby) indicator lights up in orange.
Related Topic
Turning the power off
Using the BLUETOOTH/Network standby function
4-567-508-11(1)
Copyright 2015 Sony Corporation
(on/standby) button until
190