GJD DYGIZONE GJD910 Manual page 7

Display will show Exit Delay
Instant
Press 3 to change to 30 seconds, Press 6 to change to 60 seconds, Press 0 to return to instant.
Press ENTER to save your selection.
HOW TO SET THE ARM DELAY SOUND:
(Factory Default – Silent.)
Select whether you want a silent or audible sound on any arm delay.
Quick guide: Press 1 2 3 4 > PROGRAM > 7 > ENTER > 1 > ENTER
(1 = Audible; 0 = Silent)
1. Key in the four digit user Password code (Factory Default 1234).
2. Press PROGRAM > 7 > ENTER
Display will show Exit Delay Sound
Silent
Press 1 to change to Audible, Press 0 to return to Silent.
Press ENTER to save your selection.
HOW TO SELECT WHETHER AN OUTPUT IS 5 SECOND MOMENTARY (PULSED) OR TOGGLE LATCHING:
(FIRST ACTIVATION LATCHES OUTPUT ON, SECOND ACTIVATION TURNS IT OFF)
(Factory Default – Momentary.)
Quick guide: Press 1 2 3 4 > PROGRAM > 8 > ENTER > 1 > ENTER > N > ENTER > 1 > ENTER
(N = Output 1,2,3 or 4; 0 = Timed; 1 = Latched.)
1. Key in the four digit user Password code (Factory Default 1234).
2. Press PROGRAM > 8 > ENTER > 1 > ENTER
Display will show Output
Press 1 to program Output 1, Press 2 to program Output 2, etc.
Display will show Output 1
Timed
Press 1 to Latching Toggles, Press 0 to return to instant.
Press ENTER to save your selection.
HOW TO SELECT THE TIME OF A PULSED MOMENTARY OUTPUT:
(Factory Default – 5 Seconds.)
Quick guide: Press 1 2 3 4 > PROGRAM > 8 > ENTER > 2 > ENTER > N > ENTER > Time > ENTER
(N = Output 1,2,3 or 4 Alarm sound time is from 1 minute – 99 minutes)
1. Key in the four digit user Password code (Factory Default 1234).
2. Press PROGRAM > 8 > ENTER > 2 > ENTER
Display will show Timed Pulse Time
Press 1 to program Output 1, Press 2 to program Output 2, etc.
Display will show Output Time
5 Seconds
Press digits 1-9 to create a time in seconds that you wish to select as the time for that output to activate.
Press ENTER to save your selection.
HOW TO SELECT WHETHER AN OUTPUT IS EVENT (TRIGGER ACTIVATED) AS WELL AS USER ACTIVATED:
(Factory Default – User Activated Only)
Quick guide: Press 1 2 3 4 > PROGRAM > 8 > ENTER > 3 > ENTER > N > ENTER >1 > ENTER
(N = Output 1,2,3 or 4; 0 = User Activated only; 1 = User + Event/Trigger Activated.)
-7-