Setting The Clock Manually - Roberts Blutune 200 Owner's Manual

Setting the clock manually

Normally your sound system will set its clock automatically using the DAB
radio signal. If no DAB signal is available and you need to set the time
manually, please follow the procedure shown below. The clock may be
set while the unit is in standby mode or while playing.
1. To set the clock time, press and hold the Menu button.
2. Press the Tuning Up or Down buttons until 'Set clock' appears on
the display. Press and release the Select button.
3. Press the Tuning Up or Down buttons until 'Manual' appears on the
display.
4. Press and release the Select button. The hour digits will then fl ash
on the display.
5. Press the Tuning Up or Down buttons to set the desired hour.
6. Press and release the Select button to enter the hour setting. The
minute digits will then fl ash on the display.
7. Press the Tuning Up or Down buttons to set the desired minute.
8. Press and release the Select button. The year will then fl ash on the
display.
1
<
2-7
2-7
<
2-8
<
<
< 10 MAR 2014
Clock and Alarms
Set clock
>
Set clock
Manual >
Set hour
09:00 >
Set mins
09:00
>
Set year
>
50