Selecting The Hdmi Picture Size Automatically - Sharp Aquos LC-60LE640X Operation Manual

Useful viewing functions
Option
Input label
You can label each input source with a custom
description.
1
Press b to select the desired input source from
the "INPUT" menu, and then press ?.
2
Go to "HOME" > "TV Menu" > "Setup" > "Option"
> "Terminal setting" > "Input label".
3
Press ? to display the software keyboard and
select each character of the new name for the
input source (page 15).
4
Repeat the above until the name is fully spelt out,
and then press @.
• The label can be six characters or less.
• When you want to set an input source name of less than
six characters, select "Cancel".
CH list
ATV
TV
HDMI 2
NOTE
• You cannot change labels if the input source is "TV", "USB
media" or "Home network".
Selecting the HDMI picture size
automatically
Option
HDMI auto view
This function allows you to automatically change to the
appropriate picture size when viewing an HDMI signal
using the HDMI1, 2, 3 and 4 terminals.
1
Press b to select the input source ("HDMI1",
"HDMI2", "HDMI3" or "HDMI4") connected to your
HDMI device, and then press ?.
2
Go to "HOME" > "TV Menu" > "Setup" > "Option"
> "Terminal setting" > "HDMI auto view".
Set whether or not to use "Wide mode"
Enable/Disable based on signal recognition, including an
HDMI signal.
NOTE
• Refer to your external equipment operation manual for the
above settings.
• When connecting a DVI-HDMI conversion adaptor/cable to
the HDMI terminal, the image may not come in clearly.
DTV
INPUT
Switchable
Item
Option
Headphone/Audio out select
You can select which device is used for outputting audio.
Go to "HOME" > "TV Menu" > "Setup" > "Option"
> "Terminal setting" > "Headphone/Audio out
select".
Headphone Output audio through headphones.
Output audio through an A/V receiver or
Audio out
surround audio controller.
Regarding the headphone jack
• Use headphones with a stereo mini plug ( 3.5 mm).
• Be sure to unplug headphones from the jack when they
are not in use.
• The speakers do not output volume when headphones
are plugged in.
• The "Audio" menu cannot be operated when headphones
are plugged in.
• You can set the volume to different levels for each input
source.
Volume display when headphones are plugged in
CAUTION
• This terminal is also used for headphones. Reduce the
volume before using headphones. Overwhelming sound may
damage your hearing.
NOTE
• If you select "Audio out" when a cable is inserted in the
AUDIO IN terminal, the TV speakers are muted.
• When you select "Audio out", you can adjust the TV sound
volume with the Yl/k buttons on the TV or the remote
control unit.
Item
30
47