Audio Settings - Sharp Aquos LC-60LE640X Operation Manual

Basic adjustment
Range of OPC
The brightness level range of the OPC sensor's
automatic adjustments can be set according to your
preferences. The adjustment range of the OPC sensor
can be set to a maximum of e 16 and a minimum of
f 16.
NOTE
• This function is available only when the "OPC" setting is set to
"On" or "On:Display".
• The maximum setting cannot be set to a smaller number than
the minimum setting.
• The minimum setting cannot be set to a bigger number than
the maximum setting.
• The maximum and minimum settings cannot be set to the
same number.
• Depending on the brightness of the surrounding light, the
OPC sensor might not operate if the adjustment range is
small.

Audio settings

Go to "HOME" > "TV Menu" > "Setup" > "Audio".
CH list
:Enter :Back
: Select
Audio
Auto volume
Different sound sources sometimes do not have the
same volume level, such as a programme and its
commercial breaks. This function reduces this problem
by equalising levels.
Strongly reduces the volume gaps
High
among different sound sources.
Middle
Slightly reduces the volume gaps among
Low
different sound sources.
Off Does not adjust the volume gaps.
Audio
Audio adjustment
You can adjust the sound quality to your preference with
the following settings.
c (Cursor)
Item
Treble For weaker treble
Bass For weaker bass
Decrease audio
Balance from the right
speaker
NOTE
• For resetting all adjustment items to factory preset values,
press a/b to select "Reset", press ?, press a/b to select
"Yes", and then press ?.
Menu
Setup
Audio
STANDARD
Auto volume
[Off]
Treble
Bass
Balance
L30 R30
Item
d (Cursor)
For stronger treble
For stronger bass
Decrease audio
from the left speaker
37