Panasonic PT-FW430E Operating Instructions Manual page 53

DIGITAL ZOOM
J
DIGITAL ZOOM
You can enlarge the center area.
You can also change the location of the area to be
enlarged.
Pressing the <RETURN> button cancels the
function.
DIGITAL ZOOM
1.0
Button functions during DIGITAL ZOOM
Pressing the ►button increases magnification
Pressing the ◄button decreases magnification
◄button
After setting the magnification, press the <ENTER>
button.
Pressing the ▲▼buttons moves the area to the top
or the bottom.
Pressing the ◄► buttons moves the area to the
left or the right.
Note
Magnification can be set from 1.0x to 2.0x in 0.1
z
increments. When [FRAME LOCK] in the [POSITION]
menu is set to [OFF], you can also adjust the
magnification from 1.0x to 3.0x. When the setting
mentioned above is [ON], you can adjust the
magnification from 1.0x to 2.0x.
When the input signals change during DIGITAL ZOOM,
z
the DIGITAL ZOOM function will be cancelled.
When DIGITAL ZOOM is active, the FREEZE function is
z
not available.
1.5
DIGITAL ZOOM
3.0
►button
DISPLAY OPTION menu
SIDE BY SIDE
J
[PT-FW430E only]
Two different input signals can be simultaneously
projected.
Pressing the <RETURN> button cancels the
function.
Input A Input A
Button functions during a SIDE BY SIDE
projection
When you press ▲▼, the list of available input
sources is displayed.
Press ▲▼ to select the image to show on the right
side of the screen (Input B) against the left side
of the screen (Input A), and press the <ENTER>
button.
COMPUTER S-VIDEO
DVI HDMI
: The input will be skipped if it cannot be switched
½
to.
Note
You can cancel the SIDE BY SIDE function pressing the
z
<MENU>, <RETURN>, <DVI-I>, <VIDEO/S VIDEO>,
<NETWORK>, or <HDMI> button.
[FREEZE] and [VOLUME] are set to the Input A.
z
While the SIDE BY SIDE function is activated, [AUTO
z
SETUP], [INDEX WINDOW], and [DIGITAL ZOOM] are
not available.
While the SIDE BY SIDE function is activated, you can
z
not adjust or set the MENU items.
[PICTURE] settings can be set individually for Input A
z
and Input B. (The value of [DAYLIGHT VIEW] for Input A
is applied to both inputs.)
The aspect ratio selected in the ASPECT menu is
z
maintained during a SIDE BY SIDE projection, except for
COMPUTER signals and NETWORK signals.
Depending on the combination of input signals, SIDE BY
z
SIDE projection may not be available.
For details, see "Two window display combination list"
z
( page 80).
Æ
Input A Input A Input B
VIDEO
NETWORK
53
ENGLISH -