Table of Contents
Advertisement
DISPLAY
ON SCREEN GUIDE
For displaying operation details.
Setting Values
AUTO
Appears for five seconds when an
operation is performed.
OFF
Not displayed.
BLUE BACKGROUND
For setting the screen display when there is no signal input.
Setting Values
OFF
Displays screen as it is.
ON
Switches display to a blue screen.
SCREEN SAVER
For setting whether to use a screensaver.
Setting
Values
OFF
Screen saver is not used.
ON
Screen saver is used. Switches to the burn-
in prevention screen when the unit is not
operated for more than five minutes.
OSD LANGUAGE
For setting the language for messages displayed on-screen.
Description
Description
Description
CONNECTION
MONITOR TYPE
For setting the aspect ratio according to the connected
monitor.
Setting
Values
16:9
Set to this value when connected to
monitors with 16:9 aspect ratio.
16:9FULL
Choose this setting when a 16:9 monitor is
connected to display images without the
black borders.
4:3
Set to this value when connecting to
PAN&SCAN
monitors with an aspect ratio of 4:3. Plays
back videos with the left and right edges
trimmed off.
4:3
Set to this value when connecting to
LETTERBOX
monitors with an aspect ratio of 4:3. Plays
back videos with a black band at the upper
and lower ends.
HDMI CONNECTION
VIDEO PRIORITY MODE
Setting Values
SDI/
Set to this value for output at a
COMPONENT
resolution of "576p" or higher from the
[COMPONENT VIDEO OUT] terminal,
or from the [SDI OUT] terminal.
HDMI
Set to this value when priority is to be
given to the "HDMI OUTPUT
RESOLUTION" setting.
Memo:
During data output from the [HDMI] terminal, setting to
"SDI/COMPONENT" automatically outputs data in the
"COMPONENT OUTPUT" setting.
Setting to "HDMI" outputs data in the "HDMI OUTPUT
RESOLUTION" setting.
During data output from the [HDMI] and [COMPONENT
VIDEO OUT] terminals, setting to "SDI/COMPONENT"
automatically outputs data in the "COMPONENT OUTPUT"
setting.
Setting to "HDMI" outputs data at the "576i" resolution from
the [COMPONENT VIDEO OUT] terminal.
When the [SDI OUT] terminal and the [HDMI] terminal are
connected at the same time, setting to "SDI/COMPONENT"
outputs data from the [SDI OUT] terminal.
Settings Menu
Description
Description
83
Advertisement
Table of Contents
