Mode Conversion - JVC SR-HD2500EU Instructions Manual

Editing
5 Select "ADJUST", and press the [OK] button
The modified shooting date/time is saved.
Memo:
Alternatively, you can press the [RETURN] button to cancel
the shooting date/time modification and return to the initial
screen.
The shooting date/time modification will not be reflected on
a title that was dubbed.
Pressing the [OPTION] button in the playback navigation
screen instead of the [INFORMATION CORRECT] button
will also display the shooting date/time edit screen.
① Select the title for which the shooting date/time is to
be changed, and press the [OPTION] button
② Select "EDIT INFO", and press the [OK] button
001 002
005 006
③ Select "CHANGE SHOOTING DATE/TIME", and
press the [OK] button
001 002
005 006
76
003 004
007 008
003 004
007 008

Mode conversion

You can convert HD quality video titles saved on the HDD if
they are recorded in the DR, AVC, AF, AN, AL, or AE mode.
: Seamless conversion can be performed to
Seamless
conversion enable smooth playback of joined scenes
after dubbing to a BD. (Titles recorded in
the DR recording mode h seamless)
: Enables conversion of recording mode.
Recording
mode (Titles recorded in the DR, AVC, AF, AN,
conversion AL, or AE mode hAF/AN/AL/AE/XP/SP/LP/
EP)
Memo:
As seamless conversion does not re-encode video and
audio, there is no deterioration in the image quality.
Re-encoding is performed during recording mode
conversion.
Only titles that are recorded in the DR mode enable
conversion to the XP/SP/LP/EP mode.
To apply "MODE CHANGE" after turning off the power,
select "AFTER POWER OFF" for "START METHOD" under
the "MODE CHANGE".
Note:
When seamless conversion is performed, the chapters
(excluding joints of scenes) will be combined. To divide the
chapters, insert chapter marks after seamless conversion.
For details on dividing the chapters, refer to "Chapter mark
insertion (divide chapter)" (A page 71) .
1 Press the [NAVIGATION] button on the remote
control
2 Select a title/group, and press the [OPTION]
button
3 Select "MODE CHANGE" from the Option menu,
and press the [OK] button
The "MODE CHANGE" screen appears.
4 Select a recording mode from "MODE CHANGE",
and press the [OK] button
5 Select "CONFIRM", and press the [OK] button