Samsung scd-2080p User Manual page 15

Operating Your Camera
5) Enter a title, move the cursor to 'POS' and press
the Function Setup switch. The entered title
appears on the screen. Select the position to
display the title on the screen by using the
Function Setup switch and press the Function
Setup switch. When the position is determined,
select 'END' and press the Function Setup
switch to return to the SPECIAL menu.
Notes
• W hen the CAM TITLE menu is 'OFF', no title will be displayed on the monitor screen even
if you enter one.
• O nly English is available in this mode.
• I f you move the cursor to CLR and press the Function Setup switch, all the letters are
deleted. To edit a letter, change the cursor to the bottom left arrow and press the
Function Setup switch. Move the cursor over the letter to be edited, move the cursor to
the letter to be inserted and then press the Function Setup switch.
SYNC : In areas where the supply is at 60Hz(NTSC),
50Hz(PAL), you can synchronize the output
phase of multiple cameras using the power
synchronization function (Line-Lock) without
using a synchronization signal generator.
- INT : Internal Synchronization Type
- L/L : Power Synchronization Type, Line-lock
• Press the Function Setup switch.
• You can select a desired phase from 0 to 359 when select 'phase'.
Notes
• W hen using AC power at 60Hz(NTSC), 50Hz(PAL) frequency, you can use the L/L
type synchronization.
• When the power is DC 12V, the SYNC menu is fixed to the 'INT' mode.
COLOR DOME CAMERA
FRONT DOOR
28
User Guide
MOTION DET :
This product has a feature that allows you to observe
movement of objects in 8 different areas on the
screen, and the words 'MOTION DETECTED' appear
on the screen when movement is detected. You can
monitor activity more efficient.
... 1) When the SPECIAL menu screen is displayed, press the Function Setup switch so
...
that the arrow indicates 'MOTION DET' .
2) ... S et up the mode using the Function Setup switch.
...
- SENSITIVITY : Y ou can select up to 8 MD areas. When SENSITIVITY number is high,
motion detection sensitivity is increased to recognize even small
movement.
- AREA MODE : Determines whether to use the MD area selected in SENSITIVITY.
- SEL POS : Determines which of the 4 vertices of each MD area is to be used.
- XPOS : Determines the coordinate of the horizontal axis for SEL POS.
- YPOS : Determines the coordinate of the vertical axis for SEL POS.
- FILL→SET : F ills in a selected MD area. The color of filling is sequentially selected as
brown, orange, blue, cyan, green, yellow, magenta and red.
- RETURN : S elect this to save the MOTION DET menu settings and return to the
SPECIAL menu.
PRIVACY : Mask an area you want to hide on the screen.
PRIVACY AREA SETUP
1. AREA
2. MODE
3. MASK COLOR
4. MASK TONE
5. TOP
6. BOTTOM
7. LEFT
8. RIGHT
9. RETURN
COLOR DOME CAMERA
AREA1
OFF
GREEN
1
39
79
13
52
29
User Guide