Samsung scd-2080p User Manual page 11

Operating Your Camera
AWC →SET : To find the optimal luminance level for the current environment, point
the camera towards a sheet of white paper and press the Function
Setup switch. If the environment changes, readjust it.
Notes
• W hite Balance may not work properly under the following conditions. In this case select
the AWC mode.
W hen the color temperature of the environment surrounding the subject is out of the
❶...... ... ...
control range (e.g. clear sky or sunset).
2
...When the ambient illumination of the subject is dim.
I f the camera is directed towards a fluorescent light or is installed in a place where
3 ......
illumination changes dramatically, the White Balance operation may become unstable.
SSDR (Samsung Super Dynamic Range)
SSDR illuminates darker areas of an image while retaining the same light level for brighter
areas to even out the overall brightness of images with high contrast between bright and
dark areas.
MAIN SETUP
1.LENS
2.EXPOSURE
3.WHITE BAL
4.SSDR
5.BACKLIGHT
1. When the SETUP menu screen is displayed, select 'SSDR' by using the Function Setup
switch so that the arrow indicates 'SSDR'.
2. Use the Function Setup switch to change the SSDR level in the sub menu according to
the contrast between bright and dark areas.
COLOR DOME CAMERA
DC
ATW
OFF
OFF
20
User Guide
SSDR ON
BACKLIGHT
Unlike conventional cameras, the SCD-2080 is designed so that it delivers a distinctive
subject and background at the same time, even when the subject is in backlight, by
adopting a function of the proprietary W-V DSP chip.
1. When the SETUP menu screen is displayed, select 'BACKLIGHT' by using the Function
Setup switch so that the arrow indicates 'BACKLIGHT'.
MAIN SETUP
1.LENS
2.EXPOSURE
3.WHITE BAL
4.SSDR
5.BACKLIGHT
6.SSNR3
2. Select a desired mode using the Function Setup switch depending on the camera purpose.
BLC : Enables a user to select a desired area on a picture and view that area more clearly.
- LEVEL : Adjust level of the BLC function.
- TOP/BOTTOM/LEFT/RIGHT : Adjust the area to be enhanced.
COLOR DOME CAMERA
SSDR OFF
DC
ATW
OFF
OFF
ON
21
User Guide