Sharp MD-M1 Operation Manual page 28

(Continued)
To change disc names and track
names
(Remote control operation)
NAME/
TOC EDIT
CLEAR
Example: To change "BESUT" to "BEST"
1
To change disc names, perform steps 1 - 3 on
page 25.
To change track names, perform steps 1 - 2 on
page 26.
2
Press the or button to make the character
you want to erase begin flashing.
To cancel the operation, press the
3
Press the CLEAR button.
After this step, if you are not going to enter a
character, go to step 5.
4
Select the character you want to add, pressing
the or button. Then, press the ENTER
button.
The selected character will be added, and the
original characters will move to the right by one.
5
After entering all of the characters in the name,
press the NAME/TOC EDIT button.
To add a character:
Example: To change "BET" to "BEST"
1
To change disc names, perform steps 1 - 3 on
page 25.
To change track names, perform steps 1 - 2 on
page 26.
2
Press the
/ / /
at the place you want to add a letter begin flash-
ing.
ENTER
5 3/
2 4
H
To cancel the operation, press the
3
Select the character you want to add, pressing
the
button.
The selected character will be added, and the
original characters will move to the right by one.
4
After entering all of the characters in the name,
press the NAME/TOC EDIT button.
Note:
button.
You cannot modify disc or track names created
on other equipment if they are over 40 charac-
ters.
In this case, erase the name and then enter a
new name.
27
or button to make the character
or button. Then, press the ENTER
button.