Auto Pc Adjustment - Sanyo PLC-XP200L Owner's Manual

Auto PC Adjustment

Auto PC Adjustment function is provided to automatically adjust Fine sync, Total dots, Horizontal and Vertical
positions to conform to your computer.
Direct Operation
The Auto PC adjustment function can be operated directly
by pressing the AUTO PC button on the remote control.
Menu Operation
Auto PC adj .
1
Press the MENU button to display the On-Screen Menu. Use
the Point 7 8 buttons to move the red frame pointer to the
PC Adjust Menu icon.
2
Use the Point ed buttons to move the red frame pointer
to the AUTO PC adj. icon and then press the SELECT button
twice.
To store the adjusted parameters .
The adjusted parameters from the Auto PC Adjustment can be stored in
the projector. Once the parameters are stored, the setting can be done
just by selecting Mode in PC SYSTEM Menu (p.38). See MANUAL PC
ADJUSTMENT on pages 40–41.
✔
Note:
• Fine sync, Total dots, Horizontal and Vertical position of certain
computers cannot be fully adjusted with the Auto PC Adjustment
function. When the image is not provided properly with this
operation, manual adjustments are required. (pp. 40–41.)
• Auto PC Adjustment cannot be operated in Digital Signal Input on
the DVI terminal and "480p, " "575p, " "480i, " "575i, " "720p, " "1035i, "
or "1080i" is selected on the PC SYSTEM Menu.
• Depending on the condition of signals and the type and length of
cables, the signals may not be properly viewed.
Remote Control
PC ADjUST MENU
PC Adjust Menu icon
Move the red frame pointer to the Auto PC
adj. and press the SELECT button twice.
"Please wait... " appears while the Auto PC
adjustment is in process.
Computer Input
AUTO PC button
39