Table of Contents
Advertisement
7. Programmable Features
L If you select French for the language
(feature #48 on page 48), the time is set
using a 24 hour clock (military time).
9. Press {SET}.
Note:
L To cancel after programming, press {STOP}
then {SET}.
Code #26: Setting the Caller's list to print
automatically
AUTO CALL. LIST
=ON
[±]
"ON" (default): The unit will print the Caller's list
automatically after every 30 new calls (page 33).
"OFF": The unit will not print the Caller's list, but
will keep a record of the information for the last
30 callers.
Code #31: Activating the Distinctive Ring
feature
DISTINCTIVE RING
=OFF
[±]
See page 42 for details.
Code #32: Setting the ring pattern for fax
(Distinctive Ring feature)
FAX RING PATTERN
RING=B–D
[±]
See page 43 for details.
Code #37: Receiving other size documents
AUTO REDUCTION
=ON
[±]
To receive a fax document that is longer than
your recording paper.
"ON" (default): The unit will fit received
documents onto your recording paper.
"OFF": The unit will print the original size.
Code #39: Changing the display contrast
LCD CONTRAST
=NORMAL
[±]
"NORMAL" (default): For normal contrast.
"DARKER": Used when the display contrast is too
light.
Code #41: Changing the fax activation code
FAX ACTIVATION
=OFF
[±]
If you use an extension telephone and wish to
use it to receive a fax, activate this feature and
program the activation code.
1. Press {MENU}.
48
2. Press {#}, then {4}{1}.
3. Press {A} or {B} repeatedly to select "ON".
4. Press {SET}.
5. Enter your code from 2 to 4 digits, using 0–9,
{*} and {#}.
L The default code is ";#9".
L Do not enter "0000".
6. Press {SET}.
7. Press {MENU}.
Code #44: Setting the memory reception alert
RECEIVE ALERT
=ON
[±]
To alert you with a beeping sound when a
received fax document is stored into memory
due to some existing problem.
The slow beeps will continue until you clear the
printing problem and make sure the unit is
supplied with enough paper to print the stored
document.
"ON" (default): You will hear a beeping sound.
"OFF": Deactivates this feature.
Code #46: Setting friendly reception
FRIENDLY RCV
=ON
[±]
To receive a fax automatically when you answer
a call and hear a fax calling tone (slow beep).
"ON" (default): You do not have to press {FAX
START} for fax reception.
"OFF": You have to press {FAX START} for fax
reception.
Code #48: Selecting the language
LANGUAGE
=ENGLISH
[±]
The display and reports will be in the selected
language.
"ENGLISH" (default): English is used.
"FRENCH": French is used.
Code #68: Setting the Error Correction Mode
(ECM)
ECM SELECTION
=ON
[±]
This feature is available when the
transmitting/receiving fax machines are ECM
compatible.
"ON" (default): To send a fax even if there is static
interference on the telephone line.
"OFF": Deactivates this feature.
Advertisement
Table of Contents
