Table of Contents
Advertisement
2. Preparation
2.7.4 How to setup
{A}{B}
1
Set the fax machine to FAX ONLY mode by
pressing {AUTO ANSWER} repeatedly to
display the following.
L The display will show the number of rings
before the fax machine answers a call in
FAX ONLY mode.
L You can change the ring count setting by
pressing {A} or {B}.
Press {SET} to complete the ring count
setting.
L The AUTO ANSWER light is ON.
2
Confirm the automatic answer feature on the
computer is set to off.
Note:
L You can also select "FAX ONLY MODE" by
#00 (page 16).
2.7.5 How to receive calls
When receiving calls, the fax machine will
automatically answer all calls and only receive
fax documents.
Note:
L If you use your computer as an answering
machine, please refer to page 21.
L When the fax machine is using the telephone
line (e.g., during phone calls, fax
sending/receiving), the telephone line is busy
and MODEM cannot be used.
L When the PC is using the telephone line, the
following will be displayed:
26
ON
{SET}
FAX ONLY MODE
3 RINGS
[±]
EXT. IN USE
Do not use the fax machine while the
message is displayed, or else the PC
activities could be disturbed.
Advertisement
Table of Contents
