Adjusting The Basic Position Of The Clutch Lever - KTM 390 DUKE EU Owner's Manual

12.15

Adjusting the basic position of the clutch lever

–
Check the chain sliding guard for wear.
»
1
If screw
ing guard when viewed from above:
–
Change the chain sliding guard.
–
Check that the chain sliding guard is firmly seated.
» If the chain sliding guard is loose:
–
Tighten the screw of the chain sliding guard.
Guideline
Screw, chain
guard
F00799-10
Finishing work
–
Remove the rear of the motorcycle from the lifting gear.
( p. 56)
–
Adjust the basic position of the clutch lever to your hand size
by turning adjusting wheel
Info
Push the clutch lever forward and turn the adjusting
wheel.
Do not make any adjustments while riding.
F00783-11
SERVICE WORK ON THE CHASSIS 12
C
becomes visible in area
M5 7 Nm (5.2 lbf ft)
1
.
of the chain slid-
Loctite 243™
®
63