Canon CR-N500 Installation Manual

1
2
REMOTE CAMERA
BIE 7285 000
- -
ENGLISH
Installation Guide
Important Information
© CANON INC . 2021 Printed in Japan
This "Installation Guide Important Information" is comprised of pages [1
/
Please be sure to read the "Safety Precautions" section for correct use
reading this "Installation Guide , keep it in a readily
/ Important Information"
accessible location for future reference This camera is for indoor use only
.
• The cameras described in this document may include models not
available in your country and or region
/ .
• HDMI is a trademark or registered trademark of HDMI Licensing
Administrator , Inc . in the United States and other countries .
All other company or product names used in this document are
•
trademarks or registered trademarks of their respective holders
• The contents of this document are subject to change without any prior
notice
.
The latest user manuals and software , etc . for this product can be
downloaded from the following website . The user manuals explain the
camera settings and operations Read them carefully before using the
.
camera to ensure correct use .
global canon ncsp
. /
List of Downloadable Files
User Manuals Software
• Settings Guide • Camera Search Tool
• Remote Camera Control • Remote Camera Control
Application User Manual Application
Firmware
only provided at time of update
(
Check Included Items
Camera
Ceiling Plate
Safety Wire 3 m
Wire Stopper ( for safety wire )
Camera - to - Mount Safety Wire 10 cm
M3 Screw x 6 for camera mounting camera to mount safety wire
( , - -
stopper x 4 )
Compact Power Adapter
Power Cable
IR Remote Controller
Size AAA Battery x 2 ( for IR remote controller )
Printed Materials
Symbols used in this manual
Parts indicated in the "Installation Guide
/ Important Information" [2
with this icon are not included with the camera , and should be prepared by
the user
.
Safety Precautions
Warning
Failure to follow the instructions may
result in death or serious injury
Do not install in the following places:
Places in direct sunlight near heat generating objects
• , -
to high temperatures .
• Places near fire sources or flammable solvents
Humid or dusty places
• .
• Places subject to oily smoke or steam .
• Confined or enclosed places .
Failure to do so may result in fire or electric shock
Notes on installation at high places
2] and [2 2]
/ / . • For installation or inspection of this camera
. After purchased the product .
Install the camera in a way that ensures sufficient holding strength
•
. according to the mounting place such as the wall
sure that the mounting place can sufficiently support the total weight
including the mounting parts and reinforce it if necessary
Prepare fixing screws suitable for the location and type of surface the
•
camera is to be installed .
Periodically check the mounting brackets and screws for rust and
•
loosening
.
. • Do not install in unstable places , places subject to significant vibration or
impact or places subject to salt damage or corrosive gas
,
Be sure to attach the safety wire when installing the camera
•
• Use the included ceiling plate to install the camera
only the tripod screws
.
Failure to do so may result in the camera falling or other accidents
General notes on the camera
• If any defective conditions such as smoke ,
odors damage or cracks on the external case are discovered
,
stop using the camera unplug the power cable from the outlet
,
cable for PoE + power supply ), and contact your nearest dealer
compact power adapter near the power outlet and avoid placing objects
around the power plug so that the power can be turned off immediately in
the event of an emergency .
Do not touch the camera or the connecting cables during a thunderstorm
•
Do not disassemble or modify the camera
• .
• Do not scratch , pull , or forcefully bend the cables
connections .
Do not spray the camera with water or otherwise make it wet
• ,
• Do not touch the camera , the compact power adapter
power plugs , or power outlets with wet hands
Do not allow water metal or other foreign objects to enter the camera
• ,
• Do not use flammable sprays near the camera
• Do not leave the compact power adapter (
power supply connected when the camera is not in use for long periods
)
)
• Do not use flammable solvents such as alcohol
when cleaning the camera .
Do not block the air intake or air exit vents
• .
Failure to do so may result in fire or electric shock
Notes on Power Supply
• Use only the included compact power adapter when using an AC adapter
The included compact power adapter and power cable are for this
•
product only . They cannot be used for other devices
• Do not place heavy objects on the power cable
power supply or pull forcibly bend scratch or modify it
) , ,
• Do not allow metal pins or debris to touch the power plug or terminals
and wire
,
• Wipe any dust off of the power plug . Also ,
power outlet in a dusty area take measures to prevent tracking
,
• Make sure the power plug ( or the LAN cable for PoE
seated all the way , and do not use it when the insertion is insufficient
Do not use a damaged power plug or a loose power outlet
•
manner that exceeds the rating of the wiring device such as connecting
multiple plugs to an outlet .
Failure to do so may result in fire or electric shock
Notes on batteries
/ 2]
• Do not put batteries in the fire , or do not heat
them .
Do not charge the included batteries
• .
• Do not use batteries other than those specified
Failure to do so may result in fire or electric shock
Do not use the product at:
Places where the use is prohibited such as in hospitals and on airplanes
• ,
Places within reach of babies and toddlers
•
Use at such places can cause equipment to malfunction due to
radio waves and lead to accidents
injuries
.
Caution
.
or locations subject Notes on installation
,
• Installation must be carried out safely and securely in accordance with the
( alcohol , thinner , fuel , etc .).
relevant regulations for technical standards of electrical installation
Failure to do so may result in accidents
Notes on installation
.
• Take care not to damage wiring or piping
Failure to do so may result in damage to surrounding items
, consult the dealer where you
General notes on the camera
• Do not touch the edges of metal parts with bare hands
• Be careful not to get your fingers caught when installing
, ceiling , etc . Also , make
Failure to do so may result in injuries
.
Notes on batteries
• Remove the batteries when they have been used up or will not be used for
a long time
.
• When replacing the batteries
Also , do not use different types of batteries together
Make sure and of the battery are oriented correctly
• + -
.
• If any liquid from inside the battery gets on your body due to leakage
.
rinse it off thoroughly with water
. Do not install it with
Failure to do so may result in injuries and malfunctions
.
Important
strange sounds , heat , strange
immediately
,
Do not install the camera in places where radiation
•
or the LAN
(
waves or strong magnetism are generated
. Place the
audio disturbance noise
,
• We recommend the installation of a lightning arrester
device ) as a measure against failures caused by lightning strikes
Take measures to remove static electricity before performing any
•
.
procedures .
Do not connect the compact power adapter to a transformer
•
, or put a load on their
• If there is condensation
dissipates .
.
, cable connectors ,
• Do not hold the device by the camera head
.
• Do not turn the camera rotator by hand
.
• After turning off the power
.
five seconds .
or the LAN cable for PoE +
Do not point the camera at strong light sources
•
.
clear day or strong artificial light sources
, paint thinner or benzine
the image sensor could be damaged
Do not carry the camera on a tripod
•
.
Precautions for Use
.
.
When using this product
•
( or the LAN cable for PoE +
method from the viewpoint of protecting privacy and preventing
.
infringement of rights such as portrait rights
.
Canon shall assume no responsibility for any conflict between the user
•
if the connection is made to the
and a third party regarding the installation of this product by a third party
.
other than Canon , or shooting
+ power supply ) is
The user is responsible for the network security of this product and its use
•
.
Take appropriate network security measures to avoid security breaches
or use it in a
,
To the full extent permitted by laws and regulations
nor any of its subsidiaries or affiliates shall be liable for any losses
incidental or consequential damages
a result of network security incidents such as unauthorized accesses
.
High precision video transmission is not guaranteed because the
• -
video could be delayed or missing depending on the PC or network
environment .
, short circuit or disassemble
Videos images or sounds recorded with your camera may not be utilized
• ,
or published without consent of copyright holders
way as permitted for personal use under the relevant copyright law
.
This product is subject to security export control
•
.
carry it overseas may require an authorization by governmental agencies
• Dispose of the camera and batteries in accordance with local laws and
regulations Make sure to initialize the camera and delete all the camera
.
.
settings information before disposing
.
To the full extent permitted by laws and regulations
nor any of its subsidiaries or affiliates shall be responsible for any financial
or cause electric shock and
,
losses that may be incurred as a result of the loss of recorded information or
images
EXCEPT AS SET FORTH IN THE LIMITED WARRANTY ACCOMPANYING
Failure to follow the instructions may
THE CAMERA AND WITHOUT DETRACTING FROM ANY RIGHTS
result in injuries or property damages
.
A CONSUMER MAY BE ENTITLED TO
PERMITTED BY LAWS AND REGULATIONS:
ANY OF ITS SUBSIDIARIES OR AFFILIATES MAKE ANY WARRANTY OF ANY
KIND
MANUAL OR WITH REGARD TO THE USE OF THE CAMERA INCLUDING
.
WITHOUT LIMITATION
.
MERCHANTABILITY
OR NON
OF ITS SUBSIDIARIES OR AFFILIATES SHALL BE LIABLE FOR ANY
.
DIRECT
RESULTING FROM THE USE OF THIS MATERIAL OR THE CAMERA
.
OTHER IMPORTANT INFORMATION: Please see other important information
. pertaining to the use of this product by reading our Settings Guide
. can also be found at global
.
About lamp
, replace both batteries at the same time .
Lamp
.
.
,
.
STATUS lamp
.
X rays strong radio
, - ,
. It may cause video and
POWER lamp
or malfunctions
, .
( a surge protection
.
.
, please wait to power on , until the condensation Tally lamp
.
.
, do not turn the power on again for at least
Before using the camera
such as the sun on a
(
). Internal components such as
Initial settings
.
Be sure to make the initial settings before use
.
made
details
Disclaimer SERVICE switch settings
( )
Set the camera number to be operated by the IR remote controller
Switches should be set before turning on the power
please give due consideration to the shooting
,
.
, distribution or recording using this camera .
.
.
, neither Canon Inc .
direct
, ,
or liabilities that may be incurred as
,
.
if any except in such a
, ,
.
Therefore to export or
. ,
.
.
neither Canon Inc
,
regardless of the internal or external cause of the loss
, .
, AND TO THE FULL EXTENT
( 1 ) NEITHER CANON INC
, EXPRESS OR IMPLIED , WITH REGARD TO THE MATERIAL IN THIS
IMPLIED WARRANTIES AS TO MARKETABILITY
,
, FITNESS FOR A PARTICULAR PURPOSE OR USE
- INFRINGEMENT AND ( 2 ) NEITHER CANON INC . NOR ANY
, INCIDENTAL , OR CONSEQUENTIAL DAMAGES OF ANY NATURE
, which
canon ncsp prior to using this product
. / , .
Lamp status Status
Orange light Standby
ON Power shortage
PT position error
Orange light
Firmware being updated
BLINKING
Device failure
Orange light
Standby
ON
Green light
Power on
ON
Initializing ( Starting and restarting
IR remote control signal received
Green light
Blinks twice
( )
BLINKING
Moving to or returning from standby
Device failure
Red light ON Distributing data
Green light
Preparing to distribute data
ON
. If the initial settings are not
the video cannot be outputted Refer to the "Settings Guide" for
, .
.
.
.
.
. NOR
,
,
,
.
)