Set The Condensation Prevention Heater To Min. (Swing Partition) - Hitachi R-X670GE Instruction Manual

VARIOUS FUNCTIONS
Set the condensation prevention heater to MIN.
Setting the condensation prevention heater to MIN saves energy.
When dew is formed in the swing partition, set it to the standard.
The temperature settings for the swing partition can be adjusted by three levels (1 to 2), and level 2 is the most energy
saving.
MIN setting of the heater
Preset sound
Setting the swing partition
Open the door of the Lower Freezer Compartment.
1
Touch
2
All indicator lamps turn on, and then the current settings are displayed.
3 Press down
The setting of MIN level of the dew condensation prevention heater will be switched on.
Repeat the above-stated operation to set it to the level you prefer (see the table above).
4 Close the door of the Lower Freezer Compartment.
Notice
● The setting will be returned to the standard when the power plug is disconnected and connected or power failure recovery takes place.
26
MIN setting
Standard
level 1
−
Long beep
(Factory setting)
button on the Control Panel to turn on the indicator lamp.
button for 3 seconds or more until the preset sound is heard.
(CONTINUED)
(Swing partition)
MIN setting
Standard
level 2
Long beep (2 beeps) 2 beeps
Swing partition