Table of Contents
Advertisement
Press the
You can connect the Soundbar to a new Bluetooth device in this mode by selecting the
PAIR
Soundbar from the Bluetooth device's search list.
Bluetooth
PAIR
SOUND
MODE
Press the p button to pause a music file temporarily.
When you press the button again, the music file plays.
Play / Pause
VOL
WOOFER
PAIR
SOUND
Up/Down/
MODE
PAIR
Left/Right
Press Up/Down/Left/Right on the button to select or set functions.
SOUND
MODE
VOL
WOOFER
VOL
WOOFER
When pressed, the settings TREBLE, BASS, and AUDIO SYNC are displayed in sequence.
The desired settings can be adjusted using the Up/Down buttons.
Sound Control
SOUND
MODE
VOL
PAIR button. "BT PAIRING" appears in the Soundbar's display.
Press the indicated areas to select Up/Down/Left/Right.
• Repeat
To use the Repeat function in "USB" mode, press the Up button.
• Music Skip
Press the Right button to select the next music file. Press the Left button to select the
previous music file.
• ID SET
Press and hold the Up button for 5 seconds to complete ID SET (when connecting to a
wireless subwoofer or wireless rear speakers).
• To control the volume of the treble or bass sound, press the
to select TREBLE or BASS and then adjust the volume between -6~+6 by using the Up/
Down buttons.
• Press and hold the
(Sound Control) button for about 5 seconds to adjust the sound
for each frequency band. 150Hz, 300Hz, 600Hz, 1.2kHz, 2.5kHz, 5kHz, and 10kHz are
selectable using the Left/Right buttons and each can be adjusted to a setting between
-6 to +6 using the Up/Down buttons. (Make sure the Sound mode is set to
"STANDARD".)
• If the video on the TV and audio from the Soundbar are not synchronized, press the
Sound Control button to select AUDIO SYNC and then set the audio delay between
0~300 milliseconds by using the Up/Down buttons. (Not available in "BT" and "USB"
mode.)
• AUDIO SYNC is only supported for some functions.
PAIR
ENG - 21
WOOFER
(Sound Control) button
Hide quick links:
Advertisement
Table of Contents
