Connecting An Swa-9100S (Sold Separately) To Your Soundbar - Samsung HW-A40M Full Manual

Connecting an SWA-9100S (Sold Separately) to your Soundbar

Expand to true wireless surround sound by connecting the Samsung Wireless Rear Speaker Kit
(SWA-9100S, sold separately) to your Soundbar.
1. Connect the Wireless Receiver Module to 2 Surround Speakers.
– When connecting the speaker cable, connect the core wire to the speaker.
– The speaker cables are color coded.
SURROUND-LEFT
2. Check the standby status of the Wireless Receiver Module after plugging it into an electrical outlet.
• The LINK LED indicator (blue LED) on the Wireless Receiver Module blinks. If the LED does not
blink, press the ID SET button on the back of the Wireless Receiver Module with a pen tip for
5~6 seconds until the LINK LED indicator blinks (in Blue). For more about the LED, please refer
to the SWA-9100S user manual.
SURROUND-RIGHT
L R
SURROUND SPEAKERS OUT
SPEAKER IMPEDANCE : 3
ID SET
L
SURROUND-LEFT
SURROUND SPEAKERS OUT
SPEAKER IMPEDANCE : 3
SURROUND SPEAKERS OUT
SPEAKER IMPEDANCE : 3
L R
SURROUND SPEAKERS OUT
ID SET
SPEAKER IMPEDANCE : 3
ID SET
POWER
POWER
ENG - 9
SURROUND-RIGHT
SURROUND-RIGHT
R
SURROUND-RIGHT
POWER
ID SET
STANDBY
5 Sec
STANDBY
LINK
LINK
Blue blinking