Technical Data - Mitsubishi Electric E1060 Installation Manual

3

Technical Data

E1060 of hardware
Parameter version type no 07900
Front panel, 275 x 168 x 6 mm
W x H x D
Mounting 57 mm (157 mm including clearance)
depth
Front panel IP 66
seal
Rear panel IP 20
seal
Keyboard Membrane switch keyboard with metal domes. Overlay film of Autotex
material F157 * with print on reverse side. 1 million operations.
Reverse side Powder-coated aluminum
material
Weight 1.2 kg
Serial port 25-pin D-sub contact, chassis-mounted female with
RS422/RS485 standard locking screws 4-40 UNC.
Serial port 9-pin D-sub contact, male with standard locking screws 4-40 UNC.
RS232C
Ethernet Shielded RJ 45
USB Host type A (USB 1.1), max output current 500 mA
Flash 12 MB (incl. fonts)
memory for
application
Real time ±20 PPM + error because of ambient temperature and supply voltage.
Total maximum error: 1 min/month at 25 °C
clock
Temperature coefficient: 0.004 ppm/°C
Real time CR2450 (UL and cUL: Sanyo or Panasonic)
clock Minimum lifetime: 3 years
battery
Power Normal: 0.2 A
consumption Maximum: 0.4 A
at rated
voltage
Display TFT-LCD.
320 x 240 pixels,
64K colors.
LED backlight lifetime at the ambient
temperature of +25 °C: >20,000 h.
Active area 115.2 x 86.4 mm
of display,
W x H
Fuse Internal DC fuse, 2.0 AT, 5 x 20 mm
Power supply +24 V DC (20 - 30 V DC). Power supply connector.
CE: The power supply must conform with the requirements according to
IEC 60950 and IEC 61558-2-4.
UL and cUL: The power supply must conform with the requirements for
class II power supplies.
Mitsubishi Electric, MA00817C
or higher
TFT-LCD.
320 x 240 pixels,
16 greyscales.
E1062 E1060
2
Normal: 0.3 A
Maximum: 0.5 A
Transmissive color
STN-LCD.
320 x 240 pixels,
64K colors.
CCFL backlight
lifetime at the
ambient temperature
of +25 °C: >75,000 h.
Technical Data
13