Auto Track1 - Samsung 37X User Manual

Functional Description
22. Auto Track 1 (SPD-3700T Only)
▶ Main Menu/P/T Setting/Auto Track1
This function is available only with the SPD-3700T.
Main Menu
This commands the camera to automatically follow a moving
① Camera Setting
object or a person on the screen.
② Sequence Setting
③ P/T Setting
Auto Track :
④ OSD Setting
On/Off: Turns Auto Track on or off.
⑤ Alarm Setting
Camera Height :
⑥ Initialize
Adjusts the height of the camera. Tracking performance
 Status
may decrease if the camera height is not adjusted properly.
➡
Object Size :
P/T Setting
Sets a maximum zoom power to zoom in on an object if
the Zoom function is used for the tracking operation.
① Pan/Tilt Limit
- Small : Zooms in on a tracking object up to 1/4 of the
② Area Setting
screen height.
③ Area Masking
- Medium : Zooms in on a tracking object up to 2/4 of the
 Prop. P/T
ON
 Digital Flip ON
 Image Hold - Large : Zooms in on a tracking object up to 3/4 of the
OFF
screen height.

⑦ Auto Track1

⑧ Auto Track2
Sensitivity :
➡
The object detection sensitivity is adjustable. Lower the
sensitivity if the camera catches a swaying tree branch,
Auto Track 1
raindrops, or snowflakes during the Auto Track operation.
 Auto Track OFF
Zoom Control :
 Camera Height
02.5M
The function's zoom control settings are as follows.
 Object Size SMALL
- Off : Disables the Zoom control.
 Sensitivity HIGH
- One Shot : Performs the Zoom control once during the
 Zoom Control OFF
 Auto Release OFF
 Auto Return
OFF
 Lost Mode STOP
- Continuous : Performs the Zoom control continuously.
64
SPEED DOME CAMERA
screen height.
Motion Detection and Auto Track operations.
Depending on the movement detection, the
camera performs the Zoom control multiple
times.
User's Manual
Functional Description
Auto Release :
Enables setting a maximum duration to follow an object. When the duration expires, the camera
stops following the object and returns to the start position to follow another objects.
Auto Return :
- Off : Commands the camera to stay on a last spot instead of returning to the initial position.
- Time Setting : Sets a duration for the camera to standby upon the Auto Release expiration and
then return to the start position.
Lost Mode :
Sets up an action for the camera in case the object it is following goes out of the detection
range.
- Stop : Commands the camera to stop and abort tracking at the spot where its object
disappeared.
- Research : Commands the camera to stop and standby at the spot where its object
disappeared.
- Zoom-Out : Commands the camera to zoom out and look for a new object in case its current
object disappears.
65
SPEED DOME CAMERA User's Manual