Day & Night; Others - Samsung 37X User Manual

Functional Description
7. Day & Night
▶ Main Menu/Camera Setting/Day & Night
The Day & Night function allows the camera to switch
Main Menu
between the Color and B/W modes.
① Camera Setting
Modes :
② Sequence Setting
- Auto : Operates in Color mode most times, and switches
③ P/T Setting
to B/W mode if a low light level is detected during
④ OSD Setting
nighttime.
⑤ Alarm Setting
- Color : Operates in Color mode at all times.
⑥ Initialize
 Status - B/W : Operates in B/W mode at all times. By using the
Burst On/Off sub menu, burst signals can be
➡
retained or disabled.
Camera Setting
✽ If the camera is in B/W mode and connected to equipment
that requires external sync through burst signals, set the
① Focus & Zoom
Burst On/Off option to "On."
 White Balance ATW
③ Exposure
Duration :
④ Back Light OFF
The camera's light sensitivity is adjustable as in the chart
 AGC Medium
 SSNR below. The camera's ambient light diversion performance
Medium
⑦ Day & Night may vary depending on its environment.

⑧ Others

➡
Fast
Slow
Day & Night
Dwell Time :
① Mode COLOR
The duration of both the lighting conditions can be
 Duration FAST
customized to let the camera divert between the daytime
③ Dwell Time 0.5 SEC
and nighttime settings.
Notes
 •  T heAutomodeisdisabledwhenAGCisturnedoff.Thisfunctionisonlyavailablewhen
the Color or B/W mode is selected.
 •  U sing B/W mode under sunlight or a halogen lamp may decrease the focusing
performance.
46
SPEED DOME CAMERA
Color -> B/W B/W -> Color
2.5 Lux 4 Lux
0.8 Lux 6 Lux
User's Manual
Functional Description
8. Others
▶ Main Menu/Camera Setting/Others
Sync : Enables selecting Internal Synchronization or the
Main Menu
external Line Lock. (SPD-3700T not supported)
① Camera Setting
- Internal : Synchronizes the camera's output timing to the
② Sequence Setting
③ P/T Setting
- Line Lock : Synchronizes the camera's output timing to
④ OSD Setting
⑤ Alarm Setting
⑥ Initialize
 Status - Line Lock Phase : Enables setting the adapter's
➡
Stabilizer : The Stabilizer compensates for any small
Camera Setting
① Focus & Zoom
 White Balance ATW
Notes
③ Exposure
④ Back Light OFF
 •  T heStabilizerusesthedigitalzoomandmaycause
 AGC Medium
low picture quality.
 SSNR
Medium
 •  T heStabilizerisdisablediftheambientlightistoo
⑦ Day & Night
low.
⑧ Others
 •  T heStabilizerisdisabledifthefieldofviewhasvery
➡
low or no contrast, e.g. The sky or a white wall.
Others
Image Adj :
- Sharpness : Sharpens outlines of an image.
 Sync INTERNAL
- Color : Adjusts the color density of an image.
 Stabilizer OFF
Freeze : Stops or reanimates an image.
③ Image Adj
Dome Cover :
 Freeze OFF
These settings are to optimize the camera's focused object
 Dome Cover Inner
position according to the dome cover type.
- Inner : Default dome cover type including the indoor flush
model. (Factory Release Mode)
- Outer : Dome cover type for outdoor housings except the
indoor flush model.
- None : When using the camera without a dome cover.
SPEED DOME CAMERA
internal crystal.
the AC adapter power to synchronize multiple
cameras. This option is useful when using a
switch such as Matrix Switcher.
synchronization phase between 0 and
360°.
movements of the camera caused by due to
the wind and other reasonsor other causes.
47
User's Manual