Using The "Options" Menu; Checking The Lamp Life Status; Setting On-Screen Display - Sharp AN-K2LP Operation Manual

Using the "Options" Menu

You can use the "Options" menu to enhance the usage for the projector.
Checking the Lamp Life
Status
You can confirm the cumulative lamp usage time
and the remaining lamp life (percentage).
Menu operation Page 40
Example: "Options" menu screen for
INPUT 1 mode
Description of Lamp Life
Lamp usage condition
"Life"
Operated exclusively
in Eco mode ( )
Operated exclusively
in Standard mode ( )
Note
• It is recommended that the lamp be changed
when the remaining lamp life becomes 5%. (See
page 56.)
• The table above indicates rough estimates in the
case of using only in each mode shown.
• Remaining lamp life changes within the range of
the values shown depending on the frequency at
which "Eco Mode" is switched to "
mode) and " " (Standard mode). (See page
49.)
• The lamp life may vary depending on the usage
condition.
Remaining lamp life
100% 5%
Approx. Approx.
3,000 hours 150 hours
Approx. Approx.
2,000 hours 100 hours
" (Eco

Setting On-screen Display

This function allows you to turn off the on-screen
messages that appear during input select.
Menu operation Page 40
Example: "Options" menu screen for
INPUT 1 mode
Description of "OSD Display" Settings
Selectable items
(ON)
All On-screen Displays are displayed.
INPUT/AUTO SYNC/ "An invalid button has
(OFF)
been pressed." are not displayed.
Description
-47