Sharp AN-K2LP Operation Manual page 23

Connecting to Video Equipment
When connecting the component video equipment to the DVI input terminal on the projector (INPUT 5)
• Before connecting the cable, switch the digital input type switch to "VIDEO".
Analog component
output terminal
Note
• For this connection, select "Component" for "Signal Type" on the OSD menu or press
control. (See page 48.)
When connecting the video equipment with RGB output terminal (INPUT 5)
• Before connecting the cable, switch the digital input type switch to "VIDEO".
RGB output terminal
4
Note
• For this connection, select "RGB" for "Signal Type" on the OSD menu or press
(See page 48.)
-22
DVD Player,etc.
3 RCA to 15-pin D-sub cable
(sold separately: AN-C3CP2)
4
DVD Player,etc.
RGB cable
(commercially available)
INPUT 5 terminal
3
DVI to 15-pin D-sub adaptor
(sold separately: AN-A1DV)
INPUT 5 terminal
3
DVI to 15-pin D-sub adaptor
(sold separately: AN-A1DV)
1
Switch to "VIDEO"
2
on the remote
1
Switch to "VIDEO"
2
on the remote control.