Smartstart - Miele PFD 104 SCVi Operating Instructions Manual

Running a RemoteUpdate
Information about the content and
scope of a RemoteUpdate will be
provided in the Miele@mobile App.
A message will appear in your
dishwasher display if a software update
is available.
You can install the update immediately
or postpone this until later. When the
appliance is switched on again, you will
be reminded about the update.
Deactivate RemoteUpdate if you do not
want to install the update.
The update may take several minutes.
Please note the following information
about the RemoteUpdate function:
- You will only receive a message when
an update is available.
- Once an update has been installed, it
cannot be undone.
- Do not switch the dishwasher off
during the update. Otherwise, the
update will be aborted and will not be
installed.
- Some software updates can only be
carried out by a Miele service
technician.

SmartStart

This menu option will only be
displayed if you have connected your
dishwasher to your Wi-Fi network (see
"Settings - Miele@home").
The function (only functional
SmartStart
in selected countries) is used for
starting your dishwasher automatically
at a time when energy costs are most
economical.
To use this function you may need
further technical accessories.
If you have activated
Permitted , the Timer  menu of the
selected programme will no longer
show EcoStart but will instead show
. The dishwasher will then
SmartStart
start within the timeframe specified
when it receives a signal from the
energy supplier.
If it has not received a signal from the
energy supplier by the latest possible
start time, the dishwasher will start
automatically.
Settings 
SmartStart
105