Installing and Setting Up the Server Software
3. When you see this message, click
4. When you see this message, click
5. Type a name for the printer in the Printer Name box. It can be any
name you want. This name is used only within the RIP/server interface
and is not the name that will be used on the network. (See "Setting the
Print Server Name" on page 13 to change the RIP name used on the
network.)
6. Choose
or
USB
Ethernet
7. Choose
Stylus Pro 4000
necessary.
If you see the message "There are no printers connected to this
computer using USB," check your USB connection and make sure the
printer is set up and turned on as described on your Stylus Pro 4000
Start Here sheet.
.
OK
.
OK
as the Printer Connection setting.
from the Which Printer list that appears, if
9
|
9