Epson Stylus Pro 4000 User Manual page 12

12 | Installing and Setting Up the Server Software
Note: The Use Page
Settings options are only
used for files with
unknown page
description information,
such as when you drop a
TIFF or JPEG file into a
hot folder.
3. Click
Printer Settings
4. Make changes to these settings, as necessary:
Choose
• 4-Pass
any type of banding, then try
8-Pass mode, perform a nozzle check on the Stylus Pro 4000 (see
your Stylus Pro 4000 Printer Guide for details).
Choose
• Print from Roll
paper source you are using
Choose
• Use Bidirectional Printing
(turn this off for best quality)
Choose
• Edge-To-Edge Printing
Choose
• Cut Media
method to cut roll paper
Click
• Advanced Media Control
paper feeding
Click
• Use Page Settings
center the image on the page, or offset it by a specific distance
to open the Printer Settings window.
for the Print Quality (when available). If you notice
8-Pass
or
Print from Sheet
to allow borderless printing
to allow the printer to use the printer's cut
to adjust the setting for precise
to set paper width and height settings, to
12
. If you still see banding in
, depending on the
to print in both directions