Loading Paper - Epson Stylus Photo R340 Manual

Borderless Photos
BorderFree ™ printing is available for a variety of paper types
and sizes, whether you're printing from your computer or in
stand-alone mode.
When printing from your computer, BorderFree printing
supports the following paper types and sizes:
Paper name
Epson Photo Paper
Epson Glossy Photo Paper
Epson Premium Glossy Photo Paper
Epson Premium Semigloss Photo
Paper
Epson Premium Luster Photo Paper
Epson Matte Paper Heavyweight
Epson Ultra Premium Glossy Photo
Paper

Loading Paper

1. Open the paper support and raise the extension.
2. Place your paper short edge first against the right edge of the
feeder, under the tab, with the printable (whiter or glossier)
side up. If you are loading multiple sheets, fan the stack of
paper before loading it to prevent paper jams.
Note: Don't load paper above the arrow mark inside the left edge
guide. Some special papers can be loaded only one sheet at a
time. See your on-screen User's Guide for details.
Letter
size 4 × 6 5 × 7 8 × 10
Yes No No No
Yes Yes No No
Yes Yes Yes Yes
Yes No No No
Yes No No No
Yes No No Yes
Yes Yes No No
3. Slide the left edge guide against the paper. Make sure it is
snug, but not so tight that the paper is bent. (For letter-size
paper, you may not need to move the edge guide over.)
4. Open the output tray and pull out the extension.
You should also follow these guidelines:
❏ Always load the short edge first, even when you're printing
landscape-oriented pictures.
❏ When using special papers, check the paper package for
additional instructions. Some papers require using a support
sheet included in the package.
Note: Always keep unused paper in the original package and store it
flat to prevent curling.
For instructions on loading special papers and envelopes in the
printer, see your on-screen User's Guide.
8/05
Epson Stylus Photo R340
Letter
4 × 6
Epson Stylus Photo R340 5
-