User’s Guide – for use without a computer – Notices ..........2 Printing Photos in Black and White or Sepia ..........22 Fit Frame..........22 Introduction ......... 4 Setting the Printer Preferences ..23 Loading Paper........5 Restoring to Default Settings....23 Accessing Images to Print....
Notices ■ Safety Instructions Leave enough room around the printer to allow for sufficient ventilation. Read all of the instructions in this section before using ■ Place the printer near a wall outlet where the plug your printer. Also, be sure to follow all warnings and can be easily unplugged.
Introduction Where To Find Information 3-way direct access Paper manuals Start Here Be sure to read this sheet first. Memory cards This sheet tells you how to set up the Infrared port, printer and install the software. If also Bluetooth option includes instructions on loading paper.
Loading Paper Loading Paper in the Sheet Feeder Load the paper against the right side of the sheet feeder, with the printable side up. Follow these steps to load paper. Place the stack of paper behind the tabs and make sure it fits under the c mark inside the left edge Open the paper support, then slide out the guide.
Storing Your Printouts With proper care, photographs from your printer will last for many years. The special Epson inks designed for your printer are formulated to achieve improved light fastness when used with Epson paper and the prints are properly displayed or stored.
Accessing Images to Print Inserting a Memory Card Data specifications Photo Precautions: ❏ Insert a memory card so that the top of the card faces up, as File format JPEG or TIFF, with the EXIF Versions 2.21 shown in the illustration. 80 ×...
Memory Stick Duo*/ supported. Contact your regional Customer Support for details. Memory Stick PRO Duo*/ ❏ Epson can not guarantee the compatibility of any cameras or MagicGate Memory Stick/ MagicGate Memory Stick Duo*/ drives. If you are not sure about your camera or drive, you can SD Memory Card/ try connecting it.
Saving your photos to an external When you see this screen, use the u or d button to select which folder to print from, then press the device OK button. Make sure the printer is turned on and the memory card you want to back up is inserted in the printer.
❏ You can send up to 10 pieces of image data (the maximum Use the digital camera to select the photo you want total image size is 3 MB), including documents that are to print. Be sure to make the desired setting on the being printed.
Printing Photos Introducing Photo Printing Note: ❏ You can switch the view of photos by pressing the G [Display/Crop] button (see page 13). In the s [Memory Card] mode, you can print photos ❏ When you press the G [Display/Crop] button once, you in various layouts.
Printing photos searching by Press the l or r button to highlight Print Proof Sheet on the first screen, then press the OK button. date (Print by Date) If you know the date the photos were taken, you can find and print them easily using this menu. Press the s [Memory Card] button.
For details, see “Making the Paper and Layout If you want to print a photo with a frame you Settings” on page 19. previously specified by EPSON camera, follow the steps below. Note: The Layout setting is not available when the DPOF settings are Load a memory card that contains your photos for an Index print.
Note: ❏ You can set the printable area of a CD/DVD using EPSON Print Before you move the tray lever, make sure no paper or other objects are on the front tray and the front tray is not extended.
Page 15
Insert the CD/DVD tray gently along the base of Note: If you want to check the print output first, select Plain Paper the front tray until the marks on the CD/DVD tray as the Paper Type setting and load plain paper. and the front tray match each other.
Set the appropriate value. You can adjust the Printing a CD jacket inside diameter (Inner) between 18 to 46 mm, and You can print a CD jacket on A4 paper in either upper the outside diameter (Outer) between 114 to 120 half print format or in index style.
Depending on the movie data and the timing when you stop the movie, you may not get the expected printout. Printing on Stickers You can print stickers on Photo Stickers. Load EPSON Photo Stickers paper. Press the s [Memory Card] button. Print 1 frame Prints one scene that you select as one shot.
Page 18
❏ When you press the G [Display/Crop] button once, you see a yellow frame. You can use this to crop out the rest of the photo and print just the main subject. See “Cropping and Sizing Your Photos” on page 21. Press the Copies + or - button to select the number of copies for each photo.
For this paper Select this Paper where you can make paper, layout, color or other Type setting optional settings. Plain paper Plain Paper Epson Ultra Glossy Photo Paper Ultra Glossy Making the Paper and Layout Epson Premium Glossy Photo Prem.Glossy Settings Paper...
Press the d or u button to select Layout and press Layout List the r button. Borderless Prints without a margin. Border Prints with a 3-mm margin on all sides. Upper Half Prints on upper half of paper without a margin. Select one of the following layout options, then Photo ID Prints photos at two sizes...
Improving Print Quality Note: ❏ These settings affect only your printed pictures. They do not change your original image files. You can adjust the quality of your printouts. ❏ These settings are saved when you turn off the printer or choose a different set of photos, so remember to turn off the settings Note: when you’re done.
Press the G [Display/Crop] button to crop a Press the u or d button to choose a setting: photo. You will see a yellow frame around the cropped area. None (default, turns off the date stamp) yyyy.mm.dd (2006.09.01) mmm.dd.yyyy (Sep.01.2006) dd.mmm.yyyy (01.Sep.2006) Press the OK button.
Setting the Printer Preferences Restoring to Default Settings After you change your settings, you may want to reset the printer’s settings (such as the layout, color effects, or crop settings) to the default settings before printing other photos. Press the F [Setup] button to open the Setup menu.
Ink cartridges with low ink status cannot be used when reinserted. ❏ Epson recommends the use of genuine Epson ink cartridges. The use of non-genuine ink may cause damage that is not covered by Epson's warranties, and under certain circumstances, may cause erratic printer behavior.
Replacing an ink cartridge Caution: ❏ You must remove the yellow tape from the cartridge before installing it; otherwise, print quality may decline or you may Make sure you have a new ink cartridge before you not be able to print. begin.
Page 26
Caution Do not refill the ink cartridge. Other products not manufactured by Epson may cause damage that is not covered by Epson's warranties, and under certain circumstances, may cause erratic printer behavior. Place the ink cartridge vertically into the cartridge holder.
Maintenance and Transporting ■ Improving Print Quality If there are any gaps (as shown below), press the x Start button to clean the print head again. Cleaning the print head If your printouts are unexpectedly light or faint, or dots or lines are missing, you may need to clean the print head.
Look at the alignment pattern in each set and find Cleaning the roller inside the printer the patch which is most evenly printed, with no To keep your printouts at their best, feed paper and noticeable streaks or lines. clean the roller inside by using the Load/Eject Paper Press the r button, then press the u or d button to function.
Transporting the Printer If you move your printer some distance, you need to prepare it for transportation in its original box or one of a similar size. Caution: To avoid damage, always leave the ink cartridges installed when transporting the printer. Turn on the printer, wait until the print head locks in the far right position, then turn off the printer.
Troubleshooting ■ If you have a problem with your printer, check the Run the Head Cleaning utility to clear any clogged messages on the LCD screen. ink nozzles. & See “Cleaning the print head” on page 27 ■ Run the Print Head Alignment utility. Error Messages &...
■ Make sure that the Paper Type selected on the Paper is rubbed during printing LCD screen is appropriate for the type of media When you print on thick paper, you can widen the gap loaded in the printer. where the paper feeds. Press the F [Setup] button, ■...
Printer Does Not Print The printer cannot recognize your movie data LCD screen is off If the file format of the movie does not meet the requirements, your printer cannot recognize the data ■ Make sure that the printer is on. on your memory card.
Support Telephone 84-8-823-9239 Indonesia Regional Customer Services http://www.epson.co.id If your Epson product is not operating properly and Telephone/ Jakarta: (62) 21-62301104 you cannot solve the problem using the Bandung: (62) 22-7303766 troubleshooting information in your product documentation, contact customer support services for Surabaya: assistance.
Summary of Panel Settings Memory Card mode Red-Eye For details, see “Removing Red-Eye” Reduction on page 21. On the first screen, you can select how to print or show data stored on a memory card. Brightness For details, see “Manually adjusting your photos”...
F Setup menu PictBridge Settings You can use this feature with digital Make the settings below if necessary by pressing cameras which the F [Setup] button. support the USB DIRECT-PRINT or PictBridge functions, Ink Cartridge Status For details, see and with devices which “Checking the ink allow you to send cartridge status”...
Need help?
Do you have a question about the STYLUS PHOTO R360 Series and is the answer not in the manual?
Questions and answers