Table of Contents
Advertisement
– Voicemail features (page 83)
R After this mode is turned on or off, the base
unit reboots.
– Bluetooth connections from cellular
phones or Bluetooth headset are
disconnected. If the auto connection is
turned on (page 22), the cellular phones
are reconnected.
–
will be displayed on the handset
momentarily. The handset can be used
once
is displayed.
When you use the landline again
Before connecting the telephone line to the
base unit, select "Off" in step 2, "Cellular line
only mode (If you do not use the landline)",
page 22.
Cellular line selection
This feature determines which cellular line is
selected to make cellular calls when:
– you press MCELLN on the handset.
– you press M
N or MZN on the handset
while the cellular line only mode is turned
on.
– you press MSP-PHONEN on the base unit
while the cellular line only mode is turned
on.
The following settings are available:
– "Manual" (handset only: default): You can
select the desired cellular line when making
a call.
– "Cellphone 1"
*1
(base unit default):
CELL 1 is selected.
– "Cellphone 2"
*1
: CELL 2 is selected.
Handset / Base unit
1
MMENUN#634
2
MbN: Select the desired setting. a
MSAVEN
3
Proceed with the operation for your unit.
Handset: MOFFN
Base unit: MEXITN
*1
After the Bluetooth device is paired, the
device name is displayed.
For assistance, please visit http://shop.panasonic.com/support
Storing your area code (for
dialing only a 7-digit phone
number to make a local call)
You need to add your area code when making
cellular calls to a phone number in your area.
Once you store your area code, it is
automatically added to the beginning of the
7-digit phone number when making cellular
calls.
Handset
1
MMENUN#633
2
Enter the 3-digit area code.
R To correct a digit, press MCLEARN.
3
MSAVEN a MOFFN
Changing the Bluetooth PIN
(Personal Identification Number)
The PIN is used to pair cellular phones to the
base unit. The default PIN is "0000". To
prevent unauthorized access to this product,
we recommend that you change the PIN, and
keep it confidential.
Important:
R Please make note of your new PIN. The
unit does not reveal the PIN to you. If you
forget your PIN, see page 95.
Handset
1
MMENUN#619
R If the unit prompts you to enter the old
PIN (when the default has been
changed), enter the current 4-digit PIN.
2
Enter the new 4-digit PIN. a MOKN
3
Enter the new 4-digit PIN again. a
MSAVEN a MOFFN
Link to Cell
23
Advertisement
Table of Contents
Need help?
Do you have a question about the KX-TGF970 Series and is the answer not in the manual?
Questions and answers
When dialing out, I receive a rotary dial tone instead of a pulse tone.The call will not go through. How can I change it to a pulse tone?
why do i get a busy message when i push botton to hear voice message from phone calls
You may get a busy message when trying to listen to voice messages on the Panasonic KX-TGF970 Series if the base unit is already connected to another Bluetooth device, such as a Bluetooth headset or another Panasonic DECT phone. To resolve this, disconnect the other device and then try listening to your messages again.
This answer is automatically generated
Making a call. My phone only dials out using a rotary dial sound. How can I change it to dial tone
i **** having trouble setting gum voicemail access
To set up voicemail access on the Panasonic KX-TGF970 Series, use the following operation code:
1. Press the appropriate button to access the menu.
2. Navigate to the main menu option labeled “Voicemail access.”
3. Enter the operation code #330 to listen to voicemail messages.
This will allow you to access and listen to your voicemail messages on the device.
This answer is automatically generated
How can i change the cell phone. I have a new phone and I don't see where I can reset
I’m not getting messages when people call.
You may not be receiving messages on your Panasonic KX-TGF970 Series phone due to the following reasons:
1. Voice Mailbox Full – If your phone service provider's voicemail is full, new messages may not be recorded. Try deleting old messages.
2. Message Notification Issue – You may need to remove all messages from your voicemail to clear the notification.
3. Automated Call Block – If automated call block is enabled, some calls may be screened or blocked.
4. Ring Settings – The number of rings before voicemail picks up may be misconfigured.
5. Hardware Issue – If your phone has been exposed to liquid, it may not function properly.
If the issue persists, check your voicemail settings and ensure call blocking features are not preventing messages from being recorded.
This answer is automatically generated
Can I replicate speed dial assignments to other handsets
Not able to change the number of rings before going to voicemail
To change the number of rings before going to voicemail on the Panasonic KX-TGF970 Series:
1. Press Menu.
2. Enter #211.
3. Use the navigation buttons (▲/▼) to select the desired number of rings (2-7 rings or Toll Saver).
4. Press Save.
The default setting is 4 rings.
This answer is automatically generated
@Mr. Anderson Tried this and it did not work. was able to add #211 but cursor wouldn't work. Hit stop and tried again, then it would accept #21 but wouldn't accept thrid number
I can't get through ring on my phone to more than the 3 it was set with at factory.
Unit can make outgoing calls but is not receiving calls.
The Panasonic KX-TGF970 Series unit may be unable to receive calls due to the following reasons:
1. Telephone Line Connection Issue – Ensure the telephone line cord is properly connected to the base unit.
2. Ring Settings – The number of rings before answering may be misconfigured, or the first ring may be turned off.
3. Answer by Voice Command – If this setting is enabled, it may affect call reception.
4. Automated Call Block – Incoming calls might be screened and blocked automatically.
5. Other Device Interference – The unit may be connected to another Bluetooth or DECT phone, affecting functionality.
Checking these settings and connections can help restore incoming call functionality.
This answer is automatically generated